Read Current Data

READ CURRENT DATA
1. On the [[Main Menu]] display screen, select the {Each System Check} and press the [YES] key.
2. On the [[System Selection Menu]] display screen, select the {Transmission} and press the [YES] key.
3. Press the [YES] key after the information of transmission type is displayed.
4. On the [[Transmission Diagnosis]] display screen, select the {Current Data Display & Save} and press the [YES] key.
5. On the [[Transmission Diagnosis]] display screen, select the {Data Display} and press the [YES] key.
6. Using the scroll key, scroll the display screen up or down until the desired data is shown.











^ A list of the support data is shown in the table.

NOTE: For details concerning operation procedure, refer to the SUBARU SELECT MONITOR OPERATION MANUAL.