Read Current Data

Read Current Data

OPERATION
1. On the "Main Menu" display screen, select the {Each System Check} and press the [YES] key.
2. On the "System Selection Menu" display screen, select the {Integ. Unit mode} and press the [YES] key.
3. On the "Integ. Unit mode failure diag" display screen, select the {Current Data Display & Save} and press the [YES] key.
4. On the "Data Display Menu" screen, select the {12 Data Display} and press the [YES] key.
5. Using the scroll key, scroll the display screen up or down until the desired data is shown. Scan Tool Testing and Procedures