Real-Time Diagnosis

REAL-TIME DIAGNOSIS

1. Connect the Subaru Select Monitor.
2. Turn the ignition switch and cruise control main switch to ON.
3. Turn the Subaru Select Monitor switch to ON.
4. On the "Main Menu" display screen, select the {Each System Check} and press the [YES] key.
5. On the "System Selection Menu" display screen, select the {Engine} and press the [YES] key.
6. Press the [YES] key after the information of engine type is displayed.
7. On the "Cruise Control Diagnosis" display screen, select the {Current Data Display/Save}, and then press the [YES] key.
8. Make sure that normal indication is displayed when operated as follows:
- Depress/release the brake pedal. (Stop light switch and brake switch turn ON.)
- Turn the main switch to ON.
- Turn the "CANCEL" switch to ON.
- Turn ON the "SET/COAST" switch.
- Turn ON the "RESUME/ACCEL" switch.
- Depress or release the clutch pedal.
- Place the shift lever in any position except neutral.

NOTE:
- For details concerning operation procedure, refer to "SUBARU SELECT MONITOR OPERATION MANUAL".
- For DTC, refer to "List of Diagnostic Trouble Code (DTC)". Cruise Control - Diagnostics