Parking Brake Shoe: Testing and Inspection

INSPECTION
1. Measure the brake disc rotor inside diameter. If the disc is scored or worn, replace the brake disc rotor.
Disc rotor inside diameter:
Standard: 170 mm (6.69 inch)
Service limit: 171 mm (6.73 inch)
2. Measure the lining thickness. If it exceeds the limit, replace shoe assembly.
Lining thickness:
Standard: 3.2 mm (0.126 inch)
Service limit: 1.5 mm (0.059 inch)

NOTE: Replace the right and left brake shoe as a set.