Rear Vehicle Speed Sensor

Rear Vehicle Speed Sensor

REMOVAL

VTD MODEL
When removing the rear vehicle speed sensor, refer to Front Vehicle Speed Sensor.

MPT MODEL
1. Set the vehicle on a lift, and then lift-up the vehicle.





2. Disconnect the connector from rear vehicle speed sensor.





3. Remove the rear vehicle speed sensor.

INSTALLATION

VTD MODEL
When installing the rear vehicle speed sensor, refer to Front Vehicle Speed Sensor.

MPT MODEL
Install in the reverse order of removal.

NOTE: Replace with a new O-ring.

Tightening torque: 7 Nm (0.7 kgf-m, 5.1 ft. lbs.)