Oil Charge Pipe
Oil Charge PipeREMOVAL
1. Remove the air intake chamber. (Non-turbo model)
2. Remove intercooler. (Turbo model)
3. Remove the oil charge pipe, and remove the O-ring from the flange face.
INSTALLATION
1. Install the oil charge pipe with new O-ring.
Tightening torque: 41 Nm (4.2 kgf-m, 30 ft. lbs.)
2. Install the air intake chamber. (Non-turbo model)
3. Install intercooler. (Turbo model)
INSPECTION
Make sure the oil charge pipe is not deformed or otherwise damaged.