Canister Vent Valve: Service and Repair

Drain Valve

REMOVAL
1. Set the vehicle on the lift.




2. Disconnect the ground cable from battery.
3. Lift up the vehicle.
4. Remove the canister.




5. Remove clip (A), and then remove drain valve (B) from canister.
6. Remove the filter from drain valve (B).

INSTALLATION
Install in the reverse order of removal.

CAUTION:
- Assemble the drain valve filter without any clearance.
- Make sure the packing in the groove before assembling drain valve to canister.
- Replace the clip with new one.