P0130

DTC P0130 O2 SENSOR CIRCUIT (BANK 1 SENSOR 1)

1. OUTLINE OF DIAGNOSIS
Detect the short circuit of front oxygen (A/F) sensor heater. Diagnosis is performed using front oxygen (A/F) sensor IC, and communication is established between front oxygen (A/F) sensor IC and main IC. Main IC judges OK/NG depending on the information from front oxygen (A/F) sensor IC. Front oxygen (A/F) sensor judges NG when the data of voltage (AFC, AFV) is abnormal.




2. COMPONENT DESCRIPTION




3. ENABLE CONDITION

4. GENERAL DRIVING CYCLE
Always perform the diagnosis continuously.

5. DIAGNOSTIC METHOD




Front oxygen (A/F) sensor judges NG when the continuous time of completing the malfunction criteria becomes more than the time needed for diagnosis (5 seconds). Front oxygen (A/F) sensor judges OK and clear NG when the malfunction criteria are not completed.

6. DTC CLEAR CONDITION
- When the OK idling cycle was completed 40 times in a row
- When "Clear Memory" was performed

7. MALFUNCTION INDICATOR LIGHT CLEAR CONDITION
- When the OK driving cycle was completed 3 times in a row
- When "Clear Memory" was performed

8. FAIL SAFE
- Front oxygen (A/F) sensor IC communication: Not allowed to communicate
- Front oxygen (A/F) sensor main learning correction: Not allowed to calculate
- Correction when re-starting at high temperature: Normally minimum value 0.3 -> 0
- Purge control: Not allowed to purge

9. ECM OPERATION AT DTC SETTING
Memorize the freeze frame data. (For test mode $02)