Removal and Installation
Washer Tank and MotorREMOVAL
1. Open hood.
2. Remove the 2 bolts, hose and connector and then remove the tank.
INSTALLATION
Install in the reverse order of removal.
Tightening torque: 5.9 Nm (0.6 kgf.m, 4.3 ft.lb)
REMOVAL
1. Open hood.
2. Remove the 2 bolts, hose and connector and then remove the tank.
INSTALLATION
Install in the reverse order of removal.
Tightening torque: 5.9 Nm (0.6 kgf.m, 4.3 ft.lb)