Power Steering Fluid Reservoir: Service and Repair

A: REMOVAL
1. 2.5 l MODEL
1. Drain fluid from the reservoir tank.
2. Disconnect pipe D from return hose and suction hose from oil pump.





CAUTION:
^ Do not allow fluid from the hose end to come into contact with pulley belt.
^ To prevent foreign matter from entering the hose and pipe, cover the open ends of them with a clean cloth.

3. Remove reservoir tank from bracket by pulling it upwards.

2. 3.0 l MODEL
1. Drain fluid from the reservoir tank.
2. Disconnect return hose and suction hose from reservoir tank.





CAUTION:
^ Do not allow fluid from the hose end to come into contact with pulley belt.
^ To prevent foreign matter from entering the hose, cover the open ends of them with a clean cloth.

3. Remove reservoir tank from bracket by pulling it upwards.

B: INSTALLATION
1. 2.5 l MODEL
1. Install reservoir tank to bracket.





2. Connect pipes D to return hose and suction hose to oil pump.
3. Feed the specified power steering fluid.

2. 3.0 l MODEL
1. Install reservoir tank to bracket.





2. Connect pressure hose and suction hose to oil pump.
3. Feed the specified power steering fluid.