Throttle Cable/Linkage: Service and Repair

REMOVAL
1. Remove accelerator pedal.
2. Separate accelerator cable and accelerator pedal.

INSTALLATION
1. Install in the reverse order of removal.

CAUTION:
^ If cable clamp is damaged, replace it with a new one.
^ Never fail to cover outer cable end with boot.
^ Be careful not to kink accelerator cable.
^ Do not apply grease to the throttle cable on the engine side.

2. Adjustment after pedal installation

INSPECTION
1. Make sure the inner cable is not twisted or frayed.
2. Make sure the outer cable is not cracked.