Air Cleaner Housing: Service and Repair

REMOVAL
1. Loosen clamp (A), and separate air cleaner upper cover and air intake chamber.





2. Remove the clip (B) above the air cleaner upper cover.
3. Remove air cleaner.





4. Remove air cleaner lower case.

INSTALLATION





1. Install the air cleaner lower case.
Tightening torque: 32.3 Nm (3.3 kgf-m, 23.9 ft. lbs.)
2. Set the air cleaner.
3. Install the air cleaner upper cover.





NOTE: Before installing air cleaner upper cover, align holes with protruding portions of air cleaner lower case, then secure upper cover to lower case.

4. Install the clip (B) above the air cleaner upper cover.





5. Tighten clamp (A), and connect air intake boot and air cleaner upper cover.

INSPECTION
Replace if excessively damaged or dirty.