Front Chain Cover

REMOVAL
1. Remove crankshaft pulley.





2. Remove front chain cover.

NOTE: There are four different types of chain cover mounting bolts. Sort them into separate containers to avoid confusion at installation.

INSTALLATION
1. Remove old fluid packing on the matching surface, and degrease it.





2. Apply fluid packing to the mating surface of front chain cover.
Fluid packing: THREE BOND 1280B





3. Install front chain cover. Temporarily tighten the bolts.

CAUTION: Do not confuse the mounting positions of the bolts.





4. Tighten the bolts in the numerical sequence shown in figure.
Tightening torque: 6.6 Nm (0.67 kgf-m, 4.8 ft. lbs.)

5. Install crankshaft pulley.

INSPECTION
Check the cover surface for flaws and dents. Check the cover mating surface and the mounting point of crankshaft pulley for oil leaks.