Brake Line

REMOVAL

NOTE: Airbag system wiring harness is routed near the center brake pipe.

CAUTION:
- All Airbag system wiring harness and connectors are colored yellow. Do not use electrical test equipment on these circuits.
- Be careful not to damage Airbag system wiring harness when servicing the center brake pipe.
- When removing the brake pipe, make sure that it is not bent.

INSTALLATION

NOTE: Airbag system wiring harness is routed near the center brake pipe.

CAUTION:
- All Airbag system wiring harness and connectors are colored yellow. Do not use electrical test equipment on these circuits.
- Be careful not to damage Airbag system wiring harness when servicing the center brake pipe.
- When installing the brake pipe, make sure that it is not bent.
- After installing the brake pipe and hose, bleed the air.
- After installing the brake hose, make sure that it does not touch the tire or suspension assembly, etc.
Brake pipe tightening torque:
15 Nm (1.5 kg-m, 10.8 ft. lbs.)