Rear

A: REMOVAL





1. Jack-up the rear part of the vehicle, support it with safety stands (rigid racks).





2. Remove bolts which secure stabilizer link to rear arm.





3. Remove bolts which secure stabilizer to sub frame.

B: INSPECTION
1. Check bushing for cracks, fatigue or damage
2. Check stabilizer links for deformities, cracks, or damage, and bushing for protrusions from the hole of stabilizer link.

C: INSTALLATION
To install, reverse the removal procedure.
Tightening torque:
Stabilizer link to rear arm 44 ± 6 Nm (4.5 ± 0.6 kg-m, 32.5 ± 4.3 ft. lbs.)
Clamp to sub frame 39 ± 7 Nm (4.0 ± 0.7 kg-m, 28.9 ± 5.1 ft. lbs.)