Outer Belt Side

REMOVAL AND INSTALLATION

WARNING: Replace rear seat belt worn by occupants of a vehicle that has been in a serious accident. The entire assembly should be replaced even if damage is not obvious.

1. Remove rear pillar upper trim, rear quarter lower trim and side sill rear upper cover.




2. Remove bolt and nut, then detach outer belt side.
3. Installation is in the reverse order of removal.

NOTE: Ensure that seat belt is properly reeled on and off after installation of ELR.

CAUTION:
- Ensure that seat belts are free from twisting after installation.
- Ensure that tongues, buckles and belts are properly placed on seat.