Drain Valve

1. Set the vehicle on the lift.





2. Disconnect battery ground cable.
3. Lift-up the vehicle.
4. Remove canister.





5. Disconnect connector from drain valve.





6. Remove nut which installs drain filter and drain valve brackets on body, and remove them as a unit.





7. Disconnect evaporation hoses, and remove drain valve.





8. Installation is in the reverse order of removal.

Tightening torque:
22.5 ± 7 N.m (2.3 ± 0.7 kg.m, 16.6 ± 5.1 ft.lb)