Rear

REMOVAL
1. Remove clutch housing cover (MT vehicles only).
2. Remove flywheel (MT vehicles only) or drive plate (AT vehicles only). Using ST lock crankshaft. ST 498497100 CRANKSHAFT STOPPER.






Remove rear crankshaft seal.

INSTALLATION






1. Apply a coat of engine oil to the inside of the oil seal.
2. Install rear oil seal using ST1 and ST2.
ST1 499597100 OIL SEAL GUIDE
ST2 499587200 OIL SEAL INSTALLER











3. Install flywheel or drive plate. To lock crankshaft, use ST. ST 498497100 CRANKSHAFT STOPPER.
Tighting torque: T4 72±3 (7.3±0.3, 52.8±2.2) N.m (kg-m, ft.lb)