Brake Line

WARNING: SUPPLEMENTAL RESTRAINT SYSTEM "AIRBAG"
Airbag system wiring harness is routed near the center brake pipe.

CAUTION:
^ All Airbag system wiring harness and connectors are colored yellow. Do not use electrical test equipment on these circuits.
^ Be careful not to damage Airbag system wiring harness when servicing the center brake pipe.

REMOVAL AND INSTALLATION

CAUTION:
^ When removing and installing the brake pipe, make sure that it is not bent.
^ After installing the brake pipe and hose, bleed the air.
^ After installing the brake hose, make sure that it does not touch the tire or suspension assembly, etc.

Brake pipe tightening torque: 15 +3/-2 Nm (1.5 +0.3/-0.2 kg-m 10.8 +2.2/-1.4 ft. lbs.)