Lower Side Moulding / Trim: Service and Repair

1. DOOR MOLDING
1. Open front door, and remove nut (a) from back side of front door molding.




2. Carefully remove door molding, paying attention to the location of clip (b).

NOTE: Double faced adhesive tape is affixed to the areas surrounding side protector.

3. Installation is in the reverse order of removal.

2. SIDE PROTECTOR
1. Remove clip (a) and bolt (b).




2. Carefully remove each protectors, paying attention to the location of clip (c).
3. Installation is in the reverse order of removal.