Front Bumper: Service and Repair

1. Disconnect the ground cable from the battery.
2. Remove front fog light.
3. Open the hood.




4. Turn over the front mud guard of the front portion and then remove bolt.




5. Remove the clips from under side.
6. Remove under cover.




7. Remove clips (A) from bumper face and then detach bumper face.




8. Remove E/A form from bumper beam.

NOTE: Do not forcefully remove EIA form as it may break easily.




9. Remove bumper beam.
10. Installation is in the reverse order of removal.

CAUTION:
- Be extremely careful to prevent scratches on bumper face as it is made of resin.
- Be careful not to scratch the body when removing or installing the bumper.