Restraint Systems

DIAGNOSIS: (AB6), (AB17) and (AB18) are not connected properly to airbag control module.

CAUTION: Before performing diagnostics on airbag system, turn ignition switch "OFF", disconnect battery ground cable and then wait at least 20 seconds.

5I1: CHECK POOR CONTACT IN CONNECTORS (AB6), (AB17) AND (AB18).
Check connectors (AB6), (AB17) and (AB18) connected to airbag control module.

CHECK: Is there poor contact in connectors (AB6), (AB17) and (AB18)?

YES: Repair poor contact in connectors (AB6), (AB17) and (AB18).

NO: Replace airbag control module.