Brake Hose and Pipe

BRAKE HOSE AND PIPE

Supplemental Restraint System "AIRBAG"
Airbag system wiring harness is routed near the center brake pipe.

CAUTION:
- All Airbag system wiring harness and connectors are colored yellow. Do not use electrical test equipment on these circuit.
- Be careful not to damage Airbag system wiring harness when servicing the center brake pipe.

REMOVAL AND INSTALLATION

CAUTION:
- When removing and installing the brake pipe, make sure that It is not bent.
- After installing the brake pipe and hose, bleed the air.
- After installing the brake hose, make sure that it does not touch the tire or suspension assembly, etc.





Models Without ABS





Models With ABS





Models With TCS

Models With ABS (ABS 5.3 Type):

Models With ABS (ABS 5.3 Type)





Models With ABS (ABS 5.3i TYPE)