2-Open In Solenoid Circuit

DIAGNOSIS
- Faulty solenoid and wiring
- Faulty PCM (power steering control module)

SYMPTOM
- Effort is required to operate steering wheel.
- Warning light illuminates.





1. Check solenoid.
a. Turn ignition switch "OFF."
b. Disconnect connector (B17).





c. Measure resistance between solenoid terminals indicated. Connector & Terminal/Specified resistance: To (B17) No. 1 - No. 2/5 - 9 ohm

2. Check harness between pcm and solenoid.
a. Disconnect PCM from connector
b. Connect connector (B17).





c. Measure resistance between connector (R91) terminals, and check continuity between connector (R91) terminal and GND, indicated below. Connector & Terminal/Specified resistance:
- (R91) No. 9 - No. 11/5 - 9 ohm
- (R91) No. 9 - Body/1 M ohm, or more