Drive/Propeller Shaft: Labor Times
| Standard Hours | Manufacturer Warranty Hours | Skill Level | Notes | |
| Replace | ||||
| Rear Axle | 1.0 | 0.7 | B | |
| NOTE | ||||
| To Replace Center Support Bearing, Add | 0.4 | 0.2 | B | |
| To Replace U-Joint, Add | ||||
| Each | 0.5 | 0.0 | B |
| Standard Hours | Manufacturer Warranty Hours | Skill Level | Notes | |
| Replace | ||||
| Rear Axle | 1.0 | 0.7 | B | |
| NOTE | ||||
| To Replace Center Support Bearing, Add | 0.4 | 0.2 | B | |
| To Replace U-Joint, Add | ||||
| Each | 0.5 | 0.0 | B |