E: Installation

E: INSTALLATION





1) Put into gearshift lever from passenger compartment.
2) Mount boot plate on the body.
3) Install console box and gearshift knob.





4) Mount cushion rubber on the body.

Tightening torque:
18 ± 5 N.m (1.84 ± 0.51 kg-m, 13.3 ± 3.7 ft-lb)





5) Connect rod to the joint.

Tightening torque:
FWD model
12 ± 3 Nm (1.2 ± 0.3 kg-m, 8.7 ± 2.2 ft-lb)
AWD model
18 ± 5 Nm (1.84 ± 0.51 kg-m, 13.3 ± 3.7 ft-lb)





6) Connect stay to the bracket.

Tightening torque:
18 ± 5 Nm (1.84 ± 0.51 kg-m, 13.3 ± 3.7 ft-lb)

7) Install the exhaust cover.