Removal

REMOVAL





1) Remove wheel.
2) Depress brake pedal and hold it down using a wooden block etc.
3) Remove union bolts from caliper.

CAUTION: Use brake hose cap to prevent brake fluid from escaping.





4) Remove brake hose clamp and disconnect brake hose from strut. Attach brake hose to body using gum tape.
5) Scribe an alignment mark on the camber adjusting bolt which secures strut to housing.
6) Remove bolt securing the A.B.S. sensor harness. (A.B.S. equipped models.)





7) Remove two bolts securing housing to strut.

CAUTION: While holding head of adjusting boll, loosen self-locking nut.

8) Remove the three nuts securing strut mount to body.