Handling Precautions

HANDLING PRECAUTIONS
1) Be careful not to drop brake booster. Brake booster should be discarded if it has been dropped.
2) Use special care when handling operating rod.
If excessive force is applied to operating rod, sufficient to cause a change in the angle in excess of ±3°, it may result in damage to the power piston cylinder.





3) Use care when placing brake booster on the floor.

CAUTION: If external force is applied from above when brake booster is placed in this position, the resin portion as indicated by "P", may be damaged.





4) Do not change the push rod length. If it has been changed, reset the projected length "L" to the standard length.

Standard:
L = 10 mm (0.39 in)