Removal

REMOVAL
1) Disconnect ground cable from battery.
2) Remove canister, air intake and air cleaner case duct from engine compartment to facilitate removal of hydraulic unit.
3) Disconnect brake pipes from hydraulic unit.

CAUTION: Wrap brake pipes with vinyl bag to avoid spilling brake fluid on vehicle body.

4) Disconnect connector from hydraulic unit.





5) Remove bolts which secure hydraulic unit bracket and remove hydraulic unit from engine compartment.

CAUTION:
- Hydraulic unit cannot be disassembled. Do not attempt to loosen bolts and nuts.
- Do not drop or bump hydraulic unit.
- Do not turn the hydraulic unit upside down or place it on its side.
- Be careful to prevent foreign particles from getting into hydraulic unit.
- Do not pull harness disconnecting harness connector.