Transmission Control Systems

DTC 32 Vehicle Speed Sensor 1:

Vehicle Speed Sensor 1 Circuit:

1. MEASURE SIGNAL VOLTAGE INPUT OF TCM.
a. Raise vehicle and place safety stands.
On AWD models, raise all wheels off floor.
b. Start the engine. Set vehicle in 12 miles/h condition.
c. Measure signal voltage input of TCM.

Specified value (B67) No.12 - (B66) No.20: 1 Volt AC, min.

2. CHECK HARNESS/CONNECTOR BETWEEN TCM AND VEHICLE SPEED SENSOR 1.
a. Disconnect connector from TCM.
b. Disconnect connector from transmission.
c. Measure resistance between TCM connector and transmission connector.

Specified value:
(B67) No.12 - (B14) No.16: 0 Ohms
(B67) No.12 - Body: 1 M Ohm, min.
(B66) No.20 - (B14) No.9: 0 Ohms
(B66) No.20 - Body: 1 M Ohm, min.

3. CHECK VEHICLE SPEED SENSOR 1.
a. Disconnect connector from transmission.
b. Measure resistance between transmission connector receptacle's terminals.

Specified value (T2) No 16 - No.9: 450 - 650 Ohms