Transmission Control Cable

Fig. 19 Transmission Control Cable Adjustment:

1. Loosen locknuts 1 and 2, Fig. 19.
2. Pull inner cable with throttle valve, to the fully open position so there is zero freeplay.
3. Tighten locknuts 1 and 2.
4. Loosen locknut 1, one and one half revolutions, then tighten locknut 2.
5. Fully open carburetor throttle valve, and lightly pull transmission control cable. freeplay should be 0.020-0.059 inch.
6. Install rubber boot.