AR67.10-P-1000-03MCC Prepare Window For Installation

AR67.10-P-1000-03MCC Prepare Window For Installation







Adhesive kit for isopropanol cleaner







4 Adhesive cartridge
6 Primer stick
8 Cleaning cloth
9 Cloth
10 Spacer
11 Cutting wire
12 Application nozzle
13 Wool wiper

The gluing area on the window must be absolutely free of dust and grease, flaws can lead to adhesion problems of the adhesive when glazing.

1 Check surface of window for scratches and damage; replace if necessary.
2.1 Cut off residual adhesive material of window with scraper down to a height of approx. 2 mm. Remove adhesive material residues.
Cut back adhesive residues on window max. 15 minutes before applying new adhesive bead, because the adhesive material on the cutting surface reacts to the ambient air which can lead to adhesion problems.
When reinstalling removed window.
2.2 Clean gluing area on window with cleaning rag (8) from repair kit.
When installing a new window.
3.1 Repair damaged primer layer on window with primer stick (6) from repair kit.
When reinstalling removed window. Allow primer to flash off for at least 10 - 15 minutes.
3.2 Coat gluing area on window with primer stick (6) included in repair kit (max. 20 mm).
When installing a new window.
Allow primer to flash off for at least 10 - 15 minutes. Windshields are generally delivered with a viewing window on the bottom left. If the viewing window is not required, coat this area on the inside of the window with primer stick (6).