Audio System - Audio Setting Information
Date: December 2, 2011Order No.: SM-B-82.60/05
Group: 82
SUBJECT:
MY-All, Model 451 Audio Settings
After installing the radio and after every interruption of the power supply, adjust settings on the "High-Line radio" for the best sound results before customer delivery.
In combination with all 3 sound system variants:
^ standard sound (code C08)
^ sound system (code C54) and
^ surround sound system (code C17),
...the "dynamic driving noise compensation (DNC)" must be calibrated.
In addition, the audio settings for the surround sound system (code C17) must be changed. The equalizer must be switched off so that this function can be performed by the control unit of the surround sound system.
The procedures for calibrating and making the settings are described in the operating instructions of the radio.
Optimum settings for the smart radio high in combination with the surround sound system are:
^ Balance 0
^ Bass 0
^ Treble 0
^ X bass level 0
^ X bass frequency 63
^ Hz sound profile OFF
^ Equalizer 0 (off)
^ Dynamic driving noise compensation (DNC) Calibrated
^ Volume boost 5