AR00.19-P-0120-19A Remove contacts from laminated contact system coupling

AR00.19-P-0120-19A Remove Contacts From Laminated Contact System Coupling







220 589 04 99 00, New passenger vehicle wiring harness repair kit







000 589 13 99 00, Wiring harness repair kit, basic







220 589 01 99 20, Unlocking device with RK 1.5 ejector

Unpin female contacts from coupling







1 Insert release tool with RK 1.5 ejector from front side into contact cavity of coupling (1).
Spring shackles of female contact (2) are pressed together with sleeve (3) of release tool with RK 1.5 ejector.
2 Press female contact (2) from its seat in housing using plunger on release tool with RK 1.5 ejector against spring force of tool.

When pressing out the female contact (2), make sure that the tab (4) does not break off.