AR00.19-P-0120-13A Remove contacts from FIN sensor contact connector

AR00.19-P-0120-13A Remove Contacts From FIN Sensor Contact Connector







220 589 04 99 00, New passenger vehicle wiring harness repair kit







000 589 13 99 00, Wiring harness repair kit, basic







220 589 01 99 50, Blade holder with clamping pliers







220 589 01 99 56, LSK 8 blade

Unfasten secondary release on version with disk







1 Using a suitable tool, push the disk out of the last detent in direction shown by arrow.

Unpin female contacts from connector







2 Insert blade holder with clamping pliers and LSK 8 blade from front side though openings at contact cavity of connector (1).
This results in the spring shackles (2) of the contact pin being compressed.
3 A slight tug on the corresponding cable will remove the contact pin from the connector.