Procedures

AZ82.70-P-0005-10MCD Retrofit Additional Instrument of Hands-Free System







1. Remove cover (13) from clock (A15p3).







2. Remove screws/bolts (16) and remove clock (A15p3) from additional instruments bracket (15).
The clock (A15p3) is no longer needed.







3. Attach display (A15p5) on additional instruments bracket (15).
4. Remove stay at bracket (17) in marked area (arrows A) until coupling (3.1) of display wiring harness (3) can be guided through.
5. Guide display wiring harness (3) through bracket (17).
6. Tighten display (A15p5) and bracket (17) at additional instruments bracket (15) using screws/bolts (16).
7. Fix display wiring harness (3) in place in the guide (arrow B).
8. Install cover removed from clock at display (A15p5).







9. Position additional instruments (A15) at the instrument panel.
10. Route display wiring harness (3) in accordance with routing of additional instruments wiring harness (A15) in slot of smart Entry radio.