AR00.19-P-0120-17A Remove contacts from 2.5 solder contact coupling round plug contact

AR00.19-P-0120-17A Remove Contacts From 2.5 Solder Contact Coupling Round Plug Contact







220 589 04 99 00, New passenger vehicle wiring harness repair kit







000 589 13 99 00, Wiring harness repair kit, basic







220 589 01 99 50, Blade holder with clamping pliers







220 589 01 99 53, RK 2.5 blade solder contact

Unfasten secondary release on version with slide







1 Insert a suitable tool under the slide valve cap (1).
2 Using a suitable tool, press the slide valve out of the last detent in direction shown by arrow.

Unfasten secondary release on version with securing clip







3 Using a suitable tool, pry up the side tabs of the retaining clamp (1).
4 Fold up securing clip (1) in direction of arrow.

Unpin contact from coupling







5 Insert blade holder with clamping pliers and RK 2.5 solder contact blade from rear side into cable duct of coupling.
Align sleeve of RK 2.5 solder contact blade to spring shackle (1) of coupling. This step presses the spring shackle (1) in the coupling into position.
6 Remove female contact together with blade holder with clamping pliers and RK 2.5 solder contact blade from coupling by gently pulling towards rear.