Procedures

AH91.60-P-0693-01B Note On Function Reliability Of Windowbag
- with code (I52) Head airbag


For repair work
- Before carrying out any welding work, remove ignition key, disconnect/insulate ground line of battery and detach connector from restraint system control unit.
- No particular safety precautions are necessary before carrying out painting work with subsequent force drying. The windowbag units can withstand temperatures of up to 100 °C without sustaining any damage.
- Do not allow windowbag units to come into contact with grease, oil or cleaning agents. Otherwise, windowbag units may not be installed in a vehicle under any circumstances.

For retrofits

Note tensioning straps of windowbag units.
The functionality of the windowbag units may not be impaired by aftermarket installations, e.g. by wrapping, removing or changing the tensioning straps of the windowbag units.

Safety note
The windowbag units may not be opened, removed or installed in another vehicle. Danger of malfunctions and injuries.