AN82.10-P-0007-02MCC Retrofit BRABUS Additional Headlamp Lamp Unit

AN82.10-P-0007-02MCC Retrofit BRABUS Additional Headlamp Lamp Unit







The following operation steps are shown on the right side of the vehicle. Retrofitting on the left side of the vehicle is performed in the same manner.
1. Drill hole with diameter of 4 mm in center at pin (20).
Hand drill
Wet/dry vacuum cleaner

2. Connect black 2-pin connector (12) and daytime running lights electrical connector (21) at right additional headlamp (2).
3. Screw down right additional headlamp (2) at attachment points of front fog lamp.
4. Tighten right additional headlamp (2) with screws/bolts included in delivery contents at pin (20).