AR62.30-P-1250-01MCC Position Crossmember Below Instrument Panel

AR62.30-P-1250-01MCC Position Crossmember Below Instrument Panel












450 589 02 15 00, Drift







452 589 01 23 00,Installation tool







1 Lay crossmember (1) into vehicle, insert assembly wedge (2) into crossmember (1) and close doors.
The assembly wedge (2) should be in the lowest position
2 Position crossmember (1) in vehicle and secure against falling with one drift (5) each on left and right.
Aid of helper required
3 Completely unscrew knurled screw (3) and position push-in device (4) as shown.







4 Align crossmember (1) in relation to markings on left A-pillar and screw in bolts (6, 7) on crossmember (1) up to stop
Aid of helper required Ensure that bolts (6, 7) do not fall into A-pillar opening.







5 Remove left drift (5) from crossmember (1).
Aid of helper required.
6 Align crossmember (1) in relation to markings on right A-pillar.
Aid of helper required If it is not possible to align crossmember (1) with drift (5) inserted, remove.
7 Align assembly wedge (2) with push-in device (4) by turning knurled screw (3).
8 Remove right drift (5) from crossmember (1).
Aid of helper required.







9 Screw bolts (8, 9) on crossmember (1) to stop.
Aid of helper required. Ensure that bolts (8, 9) do not fall into A-pillar opening.
10 Tighten bolts (6, 7, 8, 9) with specified tightening torque.
Aid of helper required.