AZ82.70-P-0013-01MCC Retrofit iPhone Kit Wiring Harness

AZ82.70-P-0013-01MCC Retrofit iPhone Kit Wiring Harness







Connection scheme
1 iPhone kit mount
1.1 iPhone-kit mount wiring harness
1.2 Transparent connector
4 iPhone-kit control unit
6 iPhone-kit wiring harness
6.1 Multi colored connector
6.2 Black coupling
6.3 Fuse
6.4 Black 2-pin coupling
7 iPhone-kit microphone
7.1 iPhone-kit microphone wiring harness
7.2 Black 2-pin connector
A2/1 smart radio 9 (with code (C57) smart radio 9)
A2/2 smart radio 10 (with code (C50) smart radio 10)
A2/3 smart Entry radio (with code (516) RADIO WITH USB INTERFACE)







1. Route iPhone kit wiring harness (6) behind the instrument panel (3) from the iPhone kit control unit (4) into the radio recess.
2. Connect black connector (6.2) of iPhone-kit wiring harness (6) to iPhone-kit control unit (4).
3. Strap down 6-pin coupling (8) of AUX connection connector and fix in position on the vehicle wiring harness with a cable tie.
Up to 30.8.10, the 6-pin coupling (8) is yellow. As of 31.8.10, the 6-pin coupling (8) is blue.
The multicolored connector (6.1) is connected when installing the radio.