GF82.25-P-0012MCU Panic Alarm Function

GF82.25-P-0012MCU Panic Alarm Function







1 Panic alarm request
2 Actuation of acoustic alarm
3 Actuation of visual alarm
E1e5 Left turn signal light
E2e5 Right turn signal light
E3e11 Left brake/turn signal light
E4e11 Right brake/turn signal light
E22/1 Left additional turn signal lamp
E22/2 Right additional turn signal lamp
H2 Horn
N10/10 SAM control unit
A Transmitter key

Function requirements:
^ Circuit 15 Off

General
The panic alarm provides a facility for triggering a visual or acoustic alarm using the transmitter key (e.g. in an emergency situation).

Functions
^ Triggering the panic alarm
^ Canceling the panic alarm

Triggering the panic alarm
If the panic alarm button on the transmitter key is pressed for t ≥ 1 s, a radio signal is transmitted to the SAM control unit, which checks the transmitter key authorization
If the authorization is valid, an acoustic and a visual alarm are triggered.

The acoustic alarm is issued via the horn, and the visual alarm is issued via the:
^ Left turn signal light
^ Right turn signal light
^ Left brake/turn signal light
^ Right brake/turn signal light
^ Left additional turn signal lamp
^ Right additional turn signal lamp

Actuation takes place directly via the SAM control unit.

Canceling the panic alarm
The panic alarm is canceled by pressing the panic alarm button again or by Term. 15 On.