AR01.00-P-2420-01MCU Detaching and Attaching Engine Wiring Harness on Engine

AR01.00-P-2420-01MCU Detaching And Attaching Engine Wiring Harness On Engine







1 Disconnect electrical connector (2) on adjustable camshaft timing solenoid (Y49)
2 Unclip retaining clamps (3) for engine wiring harness (1) from brackets on cylinder head cover (4).
3 Disconnect connector for O2 sensor upstream of TWC (G3/2x1) and unclip on bracket (5).
4 Remove bolts (6) and lay holder (5) to the side together with engine wiring harness (1).
5 Connect in reverse order.