AZ82.70-P-0005-04MCD Retrofit Hands-Free System Control Unit

AZ82.70-P-0005-04MCD Retrofit Hands-free System Control Unit

Ensure that electrical wiring harness for Bluetooth module (1), electrical wiring harness for Bluetooth microphone (2) and electrical wiring harness for display (3) are not damaged by chafing, pinching or crushing as otherwise they must be replaced.







1 Stick on Bluetooth module (A34/7) with felt tape included in the installation kit.
2 Connect electrical wiring harness for Bluetooth microphone (2) to Bluetooth module (A34/7) as shown.
3 Connect electrical wiring harness for display (3) to Bluetooth module (A34/7) as shown.
4 Connect electrical wiring harness for Bluetooth module (1) to Bluetooth module (A34/7) as shown.
5 Fix electrical wiring harness for Bluetooth microphone (2) in place with a cable tie at Bluetooth module (A34/7) to prevent loosening of the connector.







6 Fasten Bluetooth module (A34/7) in front passenger footwell at crossmember below instrument panel with cable ties as shown.