AN82.10-P-0008-01MCC Prepare Longitudinal Member Panel For Installation of BRABUS Longitudinal Member Panel Illumination

AN82.10-P-0008-01MCC Prepare Longitudinal Member Panel For Installation of BRABUS Longitudinal Member Panel Illumination

450 589 00 28 00, Graduated drill







1. Mark drill holes at longitudinal member panel (1) in accordance with dimensions (a to f).
The reference edge of the dimensions (a to c) is always the outer edge of the longitudinal member panel (1).







Dimensions:
a 81 mm
b 78 mm
c 76 mm
d 260 mm
e 601 mm
f 936 mm

2. Drill holes with a diameter of 25.5 mm in the marked areas with the graduated drill.
Hand drill