Parking Lamp: Locations

GF82.10-P-3000MCU Standing Light Actuation, Function







1 Driver door status
2 Request for standing lights
3 Actuation of light warning
4 Actuation of standing lights
A1 Instrument cluster
E3e2 Left taillight
E4e2 Right taillight
E6/13 Left standing light
E6/14 Right standing light
E19/1 Left license plate lamp
E19/2 Right license plate lamp
N10/10 SAM control unit
S4 Combination switch
S87/7 Left door rotary tumbler microswitch
CAN Controller Area Network (data bus/CAN bus) (CAN)

standing lights actuation
Function requirements
^ Combination switch in position 1 or
^ Circ.15 off and combination switch in position 2

Function
The switch position of the combination switch is read in by the SAM control unit, which directly actuates the following components:
^ Left and right standing light
^ Left and right taillight
^ Left and right license plate lamps

Lights on warning
If the standing light function is active, the driver door is open and circuit 15 is off, the instrument cluster emits an acoustic lamp warning.