AZ88.30-P-0003-04MCC Retrofit Rear Mud Guards

AZ88.30-P-0003-04MCC Retrofit Rear Mud Guards







The work procedure is shown on the left side of the vehicle.
1. Clean assembly area of rear dirt trap (2).
2. Position rear dirt trap (2) on fender and rear apron.
3. Position clips (4) with pliers (3) and push onto rear dirt trap (2).
Ensure that the clamps (4) are seated correctly.

4. Press clips (4) into final position with hammer handle.
Counterhold rear dirt trap (2) by hand.