Removal

CLUTCH: CLUTCH PEDAL: REMOVAL; 2013 MY FR-S [03/2012 -]

1. REMOVE POWER STEERING ECU ASSEMBLY

Removal

2. SEPARATE STEERING INTERMEDIATE SHAFT ASSEMBLY

(a) Put matchmarks on the steering intermediate shaft assembly and the steering column assembly.









(b) Remove the bolt and separate the steering intermediate shaft assembly from the steering column assembly.

3. REMOVE CLUTCH PEDAL SUPPORT SUB-ASSEMBLY

(a) Disconnect the 3 connectors.





(b) Disconnect the connector and wire harness clamp.





(c) Remove the clip and the clevis pin, and separate the clutch master cylinder push rod clevis from the clutch pedal lever sub-assembly.





(d) Remove the clip and push rod pin, and separate the brake master cylinder push rod clevis from the brake pedal.





(e) Remove the 2 nuts and separate the clutch master cylinder assembly.





(f) Remove the 3 bolts, 4 nuts and the clutch pedal support sub-assembly.









4. REMOVE CLUTCH START SWITCH ASSEMBLY Removal

5. REMOVE CLUTCH SWITCH ASSEMBLY

(a) Remove the nut and the clutch switch assembly from the clutch pedal support sub-assembly.





6. REMOVE CLUTCH PEDAL SPRING





(a) Remove the 2 E-rings and the 2 clevis pins.

(b) Remove the assist rod A, assist rod B, clutch pedal spring and assist bush.

(c) Remove the 2 bushes from the clutch pedal sub-assembly and clutch pedal support sub-assembly.

7. REMOVE CLUTCH PEDAL SUB-ASSEMBLY

(a) Using a pin punch (3 mm (0.118 in.)) and a hammer, tap out the straight pin and remove the clutch pedal lever sub-assembly.





(b) Remove the clutch pedal sub-assembly and 2 clutch pedal bushes from the clutch pedal support sub-assembly.





8. REMOVE CLUTCH PEDAL STOPPER

(a) Remove the clutch pedal stopper from the clutch pedal support sub-assembly.





9. REMOVE NO. 1 CLUTCH PEDAL CUSHION

(a) Remove the No. 1 clutch pedal cushion from the clutch pedal sub-assembly.

10. REMOVE CLUTCH PEDAL PAD

(a) Remove the clutch pedal pad from the clutch pedal sub-assembly.