Removal

CLUTCH: CLUTCH MASTER CYLINDER: REMOVAL; 2013 MY FR-S [03/2012 -]

1. DRAIN CLUTCH FLUID Removal

2. REMOVE INSTRUMENT SIDE PANEL LH Removal

3. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY Removal

4. REMOVE CLUTCH MASTER CYLINDER PUSH ROD CLEVIS

(a) Remove the clip and the clevis pin, and separate the clutch master cylinder push rod clevis from the clutch pedal lever sub-assembly.





5. REMOVE FRONT SUSPENSION UPPER TO COWL BRACE SUB-ASSEMBLY LH

Removal

6. REMOVE CLUTCH MASTER CYLINDER ASSEMBLY

(a) Remove the union bolt, 2 gaskets and the master cylinder to the release cylinder hose from the clutch release cylinder assembly.





HINT
Use a container to collect the fluid.

(b) Remove the 2 nuts and the clutch master cylinder assembly and sheet.





7. REMOVE CLUTCH MASTER CYLINDER TO FLEXIBLE HOSE TUBE





(a) Using a union nut wrench (10 mm), disconnect the clutch master cylinder to flexible hose tube from the master cylinder to release cylinder hose.

HINT
Use a container to collect the fluid.

(b) Remove the clip and the clutch flexible hose bracket.

(c) Using a union nut wrench (10 mm), remove the clutch master cylinder to flexible hose tube from the clutch master cylinder assembly.

HINT
Use a container to collect the fluid.