Removal

SEAT BELT: REAR SEAT OUTER BELT ASSEMBLY: REMOVAL; 2013 MY FR-S [03/2012 -]

HINT
* Use the same procedure for the RH side and LH side.
* The procedure listed below is for the LH side.

1. REMOVE SEPARATE TYPE REAR SEAT CUSHION ASSEMBLY Removal

2. REMOVE FRONT DOOR SCUFF PLATE Removal

3. DISCONNECT FRONT DOOR OPENING TRIM WEATHERSTRIP

HINT
Disconnect the front door opening trim weatherstrip to the extent that allows the removal of the luggage compartment trim cover.

4. REMOVE LUGGAGE COMPARTMENT TRIM COVER Removal

5. REMOVE QUARTER TRIM LID SUB-ASSEMBLY Removal

6. REMOVE REAR WINDOW SIDE GARNISH Removal

7. REMOVE REAR SEAT 3 POINT TYPE OUTER BELT ASSEMBLY

(a) Remove the bolt and disconnect the floor anchor of the rear seat 3 point type outer belt assembly.

(b) Remove the bolt A.